Detection: 1.5 pixels / 0.75m = 2 pixels per meter
Recognition: 6 pixels / 0.75m = 8 pixels per meter
Identification: 12 pixels / 0.75m = 16 pixels per meter
Classic Ergonomic Design
The familiarity of a traditional scope, our new eye piece assembly gives you a traditional scope feel with a 3" eye relief.
Sighting in your scope has never been easier with One Shot Zero.
Take a shot, adjust your reticle and you are good to go.
Digital thermal scope with over 10+hrs of continuous battery power.
Designed to withstand the pressures of high caliber weapons, the Thor LT is made from Hardened Aluminum Alloy.
The ThOR LT is lightest Thermal Scope in the ATN ThOR line, providing more versatility to mount to a Crossbow, Air Rifle, or other platforms where weight is a critical factor.
|done ATN ThOR LT 3-6x||ATN ThOR LT 4-8x|
|Sensor||160 x 120 px/17 µm 60 Hz|
|Field of view, degrees||11x8.3||8.3x6.2|
|Core||ATN Obsidian Core LT|
|Micro display||1280x720 HD Display|
|Eye relief||90 mm|
|IP rating||Weather resistant|
|Charging||USB, type C|
|Color modes||White Hot / Black Hot|
|Mount||30mm Standard Rings (not included)|
|Battery life (Li-ion)||10+ hrs|
|Operating Temperature||-20°F to +120°F / -28°C to 48°C|
|Dimensions||11.5" x 2.2" x 2.2" / 292x56x55 mm|
|Weight||1.4 lb / 650 g|
|Human Detection Range||475||625|
|Human Recognition Range||240||315|
|Human Identification Range||160||210|
* This product is subject to one or more of the export control laws and regulations of the U.S. Government and it falls under the control jurisdiction of either the US Department of State or the US BIS-Department of Commerce. It is unlawful and strictly prohibited to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction. For further information please contact ATN.