ATN NVM14-2

Night Vision Monoculars

night vision monocular nvm14
night vision monocular nvm14 night vision helicopter night vision monocular nvm14 head mount assembly night vision monocular nvm14 helmet mount assembly night vision monocular nvm14 68
keyboard_arrow_left keyboard_arrow_right

The ATN NVM14 is a hand-held, head-mounted, helmet-mounted, or weapon-mounted Night Vision System that enables walking, driving, weapon firing, short-range surveillance, map reading, vehicle maintenance, and administering first aid in both moonlight and starlight. Each unit allows for vertical adjustment (by using head straps), fore-and-aft adjustment, objective lens focus, and eyepiece focus. The ATN NVM14 Device is also equipped with an Infrared light-emitting source. The ATN NVM14 Night Vision Monocular utilizes the principle of intensification of the residual light which is reflected from the surrounding objects. The optical system of the Monocular consists of an objective lens, an Image Intensifier Tube and an eyepiece. Even under unsteady brightness conditions, Automatic Brightness Adjustment System always keeps the IIT brightness level constant. The Automatic Protective System controls the existing illumination level through the photo receiver. If the illumination level surpasses 100-300 lx for the following 10 seconds, the Monocular will shut off automatically. The eyepiece incorporates several LED indicators: - Red - serves as an IR Illuminator Indicator and an Battery Low Indicator at a time. - Green - serves as an Excessive Brightness Indicator. If the bright light remains unchanged for over 10 seconds after the indicator turns on, the Monocular will automatically shut-off.

Whats in box
Warranty Card
Instruction Manual
Lens Tissue
Soft Carrying Case 2
One Lithium Battery (CR123A)
Downloads
TECHNICAL SPECIFICATIONS
Generation
2+
Magnification
1 X
Resolution
40 - 45 lp/mm
FOV
40 °
Total Darkness IR System
Yes
Lens System
f/1.2, 27 mm
Proshield Lens Coating
Yes
Range of Focus
0.25 yard/m to infinity
Diopter Adjustment
-6 to +2
Automatic Brightness Control
Yes
Bright Light Cut-off
Yes
Infrared Illuminator
Built-in
IR Indicator
Yes
Low Battery Indicator
Yes
Power Supply
1 x 3V (CR123A)
Battery Life
60 hours
Environmental Rating
Water resistant
Operating Temperature
-40°F to 122°F/-40°C to 50°C
Storage Temperature
-58°F to 158°F/-50°C to 70°C
Dimensions
4.7" x 1.9" x 2.7"/120 mm x 49 mm x 69 mm
Weight
0.62 lbs
Weight kg
0.28 kg
* This product is subject to one or more of the export control laws and regulations of the U.S. Government and it falls under the control jurisdiction of either the US Department of State or the US BIS-Department of Commerce. It is unlawful and strictly prohibited to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction. For further information please contact ATN.
head mount assembly nvg kit

Headset with chin strap and flip-up system for "hands free" use.

More accessories
camera adapter Camera Adapter
IR850 B3 IR850-B1
helmet mount kit MICH Helmet Mount Kit
helmet mount kit PASGT Helmet Mount Kit
3x lens for nvm 3X Lens
5x lens for nvm 5X Lens