ATN ThOR LT 160 4-8x
$ 1,199  Buy
subscription

MEMORIAL DAY GIVEAWAY
OTS LT 160 3-6X

close
* for US residents only

Sign up to our Email List and Win!!!

ATN ThOR LT 160 4-8x

Ultra Light Thermal Rifle Scope

Thermal Detection Range Chart
Detection
625
Recognition
315
Identification
210
Detection: 1.5 pixels / 0.75m = 2 pixels per meter
Recognition: 6 pixels / 0.75m = 8 pixels per meter
Identification: 12 pixels / 0.75m = 16 pixels per meter
It’s been amazing loving it
Tristan N.
4.73
rating based on 44 review
It’s been amazing loving it
It’s been amazing loving it I will be buying another.
Tristan N.
Works well with the recommended
Works well with the recommended detachable scope mount. Easy to zero. Great introduction to thermals.
Joey W.
Good buy for the price
The quality is definitely good for the price. The thermal image is pretty close to the way they advertise it and the quick attach it does well also when you snug down on it.
Matthew L.
Brightness of screen when there
Brightness of screen when there is no heat source is blinding even on low contrast. Sensitivity is good, as a deer found that was stiff still showed a slight heat source.
Douglas T.
Better than I expected!
My problems are coyotes. There are too darn many around us and they've lost their fear of humans so I figured that a thermal scope might help me with my problems. This was my first thermal scope purchase so I figured that I'd start with one at the low end of the price range before investing more in one. After reading some of the reviews, I wasn't expecting too much, but I've been very impressed so far. The scope showed up in a week or less. Before I mounted it on the .243 that I intended to start with, I walked around with it and could identify rabbits at 50 yards. Coyotes are identifiable at 250+ yards and I can spot deer out to at least 500 yards. I bought it strictly for coyotes though and I doubt that I'll try any shots at coyotes over 200 yards (but then again, I might... I haven't had time to play with it much since I've only had it mounted on the rifle for a couple of weeks). When I first tried it, I had a little trouble getting the one shot zero to work so I called customer service. They had me do a factory reset and it worked after that, although it was still a little troublesome. After entering the Zero mode, the "OK" still didn't want to accept my zero after the shot, but after a few tries, it worked. I've only fired one shot through it after zeroing and I took down a coyote at 85 yards. I can't wait to fine tune it so that I can put it to even more and better use. I would definitely purchase from ATN again and will likely do so in the near future, and I wouldn't hesitate to recommend them to a friend. Customer Service answered quickly and were helpful and for the price, I'm very pleased. I'd have given it 5 stars if the Zero function had worked flawlessly.
Michael F.
Well worth the money
Great scope easy to use targets appear crystal clear and it is a lot lighter than I thought.
James D.
Worth the Momeyfor sure
Worth the Momeyfor sure
Michael M.
Worth the money
More than happy..a little grainy at 8x but i knew that going in..had one instance that it wouldnt power up so i had to do a reboot and let the coyote pass..i used it 2 nights so far and harvested 4 coyotes..will prolly purchase an upgrade in near future..
Jim V.
Easy to use, easy to
Easy to use, easy to zero, great contrast
Randy I.
Great scope for my needs
Bought the scope to knock down some coyotes. Very easy to sight & zero the scope. Bought the quick detach scope mount from ATN. My only complaint so far is the scope rattled loose after about 25 shots. Torqued it down a bit and it remained stable.
Joe N.

Black hot / White hot mode

Easy to mount — Easy to use

Classic Ergonomic Design
The familiarity of a traditional scope, our new eye piece assembly gives you a traditional scope feel with a 3" eye relief.
HD Display
1280x720p

One Shot Zero

Sighting in your scope has never been easier with One Shot Zero.
Take a shot, adjust your reticle and you are good to go.

MOSSY OAK

You can choose available color in the shopping cart. Once you select the model, you can choose the color pattern during checkout.

Ultra Low Power Consumption

Digital thermal scope with over 10+hrs of continuous battery power.
Recoil Resistant
Designed to withstand the pressures of high caliber weapons, the Thor LT is made from Hardened Aluminum Alloy.

Light Weight

The ThOR LT is lightest Thermal Scope in the ATN ThOR line, providing more versatility to mount to a Crossbow, Air Rifle, or other platforms where weight is a critical factor.
1.4 lb
650 g

TECHNICAL SPECIFICATIONS

ATN ThOR LT 160 3-6x done ATN ThOR LT 160 4-8x ATN ThOR LT 160 5-10x ATN ThOR LT 320 2-4x ATN ThOR LT 320 3-6x ATN ThOR LT 320 4-8x ATN ThOR LT 320 5-10x
SKU TIWSTLT136X TIWSTLT148X TIWSTLT150X TIWSTLT319X TIWSTLT325X TIWSTLT335X TIWSTLT350X
Sensor160 x 120 px/17 µm 60 Hz320x240 px/12 μm 60 Hz
Magnification3-6x4-8x5-10x2-4x3-6x4-8x5-10x
Field of view, degrees11x8.38.3x6.24.6x3.311.6x8.78.8x6.66.3x4.711.6x8.7
CoreATN Obsidian Core LT
Micro display1280x720 HD Display
Eye relief90 mm
IP ratingWeather resistant
ChargingUSB, type C
3D AccelerometerYes
Color modesWhite Hot / Black Hot
ReticlesMultiple Patterns
Mount30mm Standard Rings (not included)
Battery life (Li-ion)10+ hrs
Operating Temperature-20°F to +120°F / -28°C to 48°C
Dimensions292x56x55 mm / 11.5” x 2.2” x 2.2”
Weight1.4 lb / 650 g
Human Detection Range47562599571591015101620
Human Recognition Range240315465305455680710
Human Identification Range160210285200290400415
Warranty3 years
* This product is subject to one or more of the export control laws and regulations of the U.S. Government and it falls under the control jurisdiction of either the US Department of State or the US BIS-Department of Commerce. It is unlawful and strictly prohibited to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction. For further information please contact ATN.
Included accessories
eyecup Eyecup
cover Scope Cover
usb c cable USB-C Cable
214 Lens Tissue
qdm

The ATN Quick Detach and Release Mount is a great addition for your new X-Sight 4K, ThOR 4 or ThOR LT. Take advantage of the profile manager of your QD scope rings, move it from platform to platform and still retain zero.

  • Hardened Aluminum Alloy
  • Works with 30 mm tube scopes
  • Adjustable quick detach mechanism
  • Perfect for X-Sight 4K Series, ThOR 4 Series or ThOR LT Series
  • Retain Zero when swapping between platforms

More accessories
ATN STORE

3000 Grapevine Mills PKWY

Space #133, Grapevine, TX 76051