ITT Pinnacle™ Image Intensifier Tubes ATN Night Vision Units with the 3P designation use ITT Pinnacle™ Image Intensifier Tubes. The industry leading ITT Pinnacle™ Image Tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas, such as urban environments. The Pinnacle™ Tube with gated power supply minimizes any "halo" effects. "Halo" is often associated with using Night Vision Devices in the urban area where random street lights are often an issue with early Generation Night Vision Devices. Night Vision Units with Pinnacle™ Tubes have a typical resolution of 64-72 lp/mm and a typical Signal-to-Noise Ratio of 24. All Night Vision Devices utilizing Pinnacle™ Image Intensifier Tubes come with ITT data record sheet. Units with Pinnacle™ tubes are not available for export. A signed export compliance and end use statement are required prior to shipping of these units. *Pinnacle is a registered trademark of ITT Night Vision
description Representing the latest advancement in Night Vision Optics, the ATN PS40-3P MGC gives your Night Vision capability in a matter of seconds. The ATN PS40-3P MGC mounts in front of a Daytime Scope to enable nighttime operation. No shift of impact, no need to rezero nor change of eye relief occurs. The ATN PS40-3P MGC uses the latest in image intensifier tube technology for outstanding resolution and performance. Precision optical alignment is essential for a work properly. This is why each ATN PS40-3P MGC is individually tested and aligned on an optical scale by our engineers to provide perfect alignment. The ATN PS40-3P MGC is one of the most compact and lightweight NV systems in its class, at only 840 grams. The ATN PS40-3P MGC has a Variable Gain Control to manually adjust the IIT brightness.
FEATURES Easily changes daytime scope to Night Vision Mounts in front of daytime scope, no re-zeroing required Multi-coated all-glass optics Fast catadioptic front lens system Equipped with remote control Powered by a single alkaline AA or 123A lithium battery Battery life check system Large 40 mm eyepiece/output window Included Quick Release Mount Optional Scope Mounting System for coupling to the objective of the day scope (47...58,7 mm diameter) Automatic Brightness Control Bright Light Cut-off System Resistance to severe conditions Manual Gain Control Limited Two-Year Warranty
Specification Total Darkness IR System No "SMART" Technology No IIT Generation 3Photocathode Type Thin-Filmed/Auto-Gated Resolution 64-72 lp/mmSignal to noise ratio 25-30 Figure of merit1800 typical Photocathode Sensitivity 2000-2800 MTTF - Mean Time Before Failure 10000 hoursMagnification 1x Lens SystemF1.44, 80 mm Proshield Lens Coating Yes FOV 12° Exit Pupil 40 mm Range of Focus 10 m to infinityDiopter Adjustment No Controls Direct Remote Control Yes Automatic Brightness Control ManualBright Light Cut-off YesInfrared IlluminatorNo IR Indicator No Low Battery Indicator Yes Power Supply 1x1.5 V AA type battery or 1x3 V CR123A type batteryBattery Life 50 hours ( 3 V ) 25 hours (1. 5 V ) Reticle System No Windage & Elewation Adjustment NoEnvironmental Rating Waterproof MIL-STD-810 Yes Operating Temperature-20 to +50 °CStorage Temperature-50 to +50 °CDimensions 177 x 85 x 83 mm 7.0" x 3.4" x 3.3"Weight0.84 kg / 1.85 lbsWarranty2 years
