ATN PS22-CGT

Day/Night System

Day/Night System - ATN PS22-CGT
  • Easily changes daytime scope to Night Vision
  • Waterproof
  • Lightweight and rugged
  • Fast catadioptric front lens system
  • Large 21 mm output window
  • Automatic Brightness Control
  • Resistance to severe conditions
  • Comes with Quick Release Mount
Select device:
Measurements: Meters
The Johnson Criteria assumes that the critical dimension for a human being is 0.75 meters. To get DRI, you need 1.5 pixels, 6 pixels and 12 pixels across 0.75 meters in the object pane. That means:
  • • Detection

    1.5 pixels / 0.75m = 2 pixels per meter

  • • Recognition

    6 pixels / 0.75m = 8 pixels per meter

  • • Identification

    12 pixels / 0.75m = 16 pixels per meter

Assuming that a man is 1.83m by 0.5m, the following would apply:
  • Detection 3.6 pixels by 1 pixel
    (You can see something is there)
  • Recognition 13 pixels by 5 pixels
    (You can see that a person is there)
  • Identification 28.8 pixels by 8 pixels
    (You can see that the person looks like a civil man)
Measurements: Meters
The Johnson Criteria assumes that the critical dimension for a human being is 0.75 meters. To get DRI, you need 1.5 pixels, 6 pixels and 12 pixels across 0.75 meters in the object pane. That means:
  • • Detection

    1.5 pixels / 0.75m = 2 pixels per meter

  • • Recognition

    6 pixels / 0.75m = 8 pixels per meter

  • • Identification

    12 pixels / 0.75m = 16 pixels per meter

Assuming that a vehicle is 4m by 1.5m, the following would apply:
  • Detection 3.6 pixels by 1 pixel
    (You can see something is there)
  • Recognition 13 pixels by 5 pixels
    (You can see that a person is there)
  • Identification 28.8 pixels by 8 pixels
    (You can see that the person looks like a civil man)

  • Easily changes daytime scope to Night Vision
  • Waterproof
  • Lightweight and rugged
  • Fast catadioptric front lens system
  • Large 21 mm output window
  • Automatic Brightness Control
  • Resistance to severe conditions
  • Comes with Quick Release Mount
Item # NVDNPS22C0

The ATN PS22 is an attachment for a Daytime Riflescopes with 1x Magnification that converts Scope into a high-quality very accurate Night Vision Weapon Sight. The ATN PS22 System mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22 comes standard with 7/8" weaver mount. There is also an Adapter for ARMS quick release mount. Optional Ring Adapters allow to mount the unit onto the objective of the Daytime Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail. This ingenious setup allows the shooter to go from day to night in less than 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock. The ATN PS22 is a complex optical-electronic system. The device contains an Image Intensifier Tube assembly with an integrated high-voltage power source and the three volt battery housing.

This product is Not available for export

Total Darkness IR System Yes
IIT Generation CGT
Resolution 45-54 lp/mm
Signal to Noise Ratio 16-22
Figure of Merit <1250
MTTF - Mean Time Before Failure 10,000 hours
Magnification 1x
Lens System F1.44, 80 mm
Proshield Lens Coating Yes
FOV 13°
Range of Focus 10 yd/m to infinity
Diopter Adjustment
Controls Direct
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Detachable
IR Indicator No
Low Battery Indicator No
Power Supply 1 x 3V(CR123A)
Battery Life 60 hrs
Environmental Rating Waterproof
Operating Temperature -40°F to +122°F/-40°C to +50°C
Storage Temperature -58°F to +158°F/ -50 to +70 °C
Dimensions 5.9" x 3.2" x 2.8" / 150 x 80 x 72 mm
Weight 1.4 lbs /0.64 kg
Warranty 2 years

INCLUDED ACCESSORIES

  • Instruction Manual Instruction Manual
  • Lens Tissue Lens Tissue
  • One Lithium Battery One Lithium Battery
  • Warranty card Warranty card
  • Mil-Spec Hard Case Mil-Spec Hard Case
  • IR450-B4 IR450-B4
  • Quick Release Mount Quick Release Mount
  • Remote Control Unit Remote Control Unit
  • Picatinny Rail Picatinny Rail
  • Light Supressor for the scopes with 42-63 mm lens diameter Light Supressor for the scopes with 42-63 mm lens diameter
  • Light Supressor for the scopes with 30-42 mm lens diameter Light Supressor for the scopes with 30-42 mm lens diameter
  • Light Supressor for Trijicon ACOG scopes Light Supressor for Trijicon ACOG scopes

OPTIONAL ACCESSORIES

  • Specification Sheet 536.3 KB (17.12.2013 update) Download
  • User guide 1.3 MB (17.12.2013 update) Download
  • Full Information Package 1.7 MB (06.06.2014 update) Download