ATN PS22-3P Day/Night System

info@atncorp.com — Tue, 18 Jun 2013 21:37:57 GMT

The ATN PS22-3P System is an attachment for a Daytime Riflescopes with 1x Magnification that converts scope into a high-quality, very accurate Night Vision Weapon Sight. The ATN PS22-3P mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22-3P comes standard with 7/8" weaver mount. There is also Adapter for ARMS quick release mount and optional Ring Adapters allows to mount unit onto the objective of the Day Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail. This ingenious setup allows the shooter to go from day to night in less than 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock. The ATN PS22-3P is a complex optical-electronic system. The Night Vision Device contains an Image Intensifier Tube assembly with an integrated high-voltage power source and the three volt battery housing. ATN PS22 сustomer testimonial 1 ATN PS22 сustomer testimonial 2 ATN PS22 сustomer testimonial 3 ATN PS22 review 1

Specification:

Total Darkness IR System Yes
"SMART" Technology No
IIT Generation 3
Photocathode Type Thin-Filmed/Auto-Gated
Resolution 64-72 lp/mm
Signal to Noise Ratio 25-30
Figure of Merit 1800 typical
Photocathode Sensitivity 2000-2800
MTTF - Mean Time Before Failure 10,000 hours
Magnification 1x
Lens System F1.44, 80 mm
Proshield Lens Coating Yes
FOV 13°
Exit Pupil 21 mm
Range of Focus 10 m to infinity
Diopter Adjustment No
Controls Direct
Remote Control Yes
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Detachable IR450
IR Indicator Yes
Low Battery Indicator No
Power Supply 1 x 3 V CR123A type battery
Battery Life 50 hrs
Reticle System No
Windage & Elewation Adjustment No
Environmental Rating Waterproof
MIL-STD-810 Yes
Operating Temperature -40 to +50 °C
Storage Temperature -50 to +70 °C
Dimensions 150x80x72 mm
5.9"x3.2"x2.8"
Weight 0.64 kg / 1.4 lbs
Warranty 2 years

Features:

Easily changes daytime scope to Night Vision
Mounts in front of the daytime scope, no re-zeroing required
Multi-coated all-glass optics
Fast catadioptic front lens system
Large 21 mm output window
Lightweight and rugged
Comes with Quick Release Mount
Optional 7/8" weaver mount
Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter)
Automatic brightness control
Resistance to severe conditions
Up to 60 hours of continuous operation with one Lithium battery
Limited Two-Year Warranty

American Technologies Network Corporation - ATN PS22-3P

ATN PS22-3P Day/Night System