ITT Pinnacle™ Image Intensifier Tubes ATN Night Vision Units with the 3P designation use ITT Pinnacle™ Image Intensifier Tubes. The industry leading ITT Pinnacle™ Image Tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas, such as urban environments. The Pinnacle™ Tube with gated power supply minimizes any "halo" effects. "Halo" is often associated with using Night Vision Devices in the urban area where random street lights are often an issue with early Generation Night Vision Devices. Night Vision Units with Pinnacle™ Tubes have a typical resolution of 64-72 lp/mm and a typical Signal-to-Noise Ratio of 24. All Night Vision Devices utilizing Pinnacle™ Image Intensifier Tubes come with ITT data record sheet. Units with Pinnacle™ tubes are not available for export. A signed export compliance and end use statement are required prior to shipping of these units. *Pinnacle is a registered trademark of ITT Night Vision
description The ATN PS22-3P System is an attachment for a Daytime Riflescopes with 1x Magnification that converts scope into a high-quality, very accurate Night Vision Weapon Sight. The ATN PS22-3P mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22-3P comes standard with 7/8" weaver mount. There is also Adapter for ARMS quick release mount and optional Ring Adapters allows to mount unit onto the objective of the Day Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail. This ingenious setup allows the shooter to go from day to night in less than 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock. The ATN PS22-3P is a complex optical-electronic system. The Night Vision Device contains an Image Intensifier Tube assembly with an integrated high-voltage power source and the three volt battery housing. ATN PS22 сustomer testimonial 1 ATN PS22 сustomer testimonial 2 ATN PS22 сustomer testimonial 3 ATN PS22 review 1
FEATURES Easily changes daytime scope to Night Vision Mounts in front of the daytime scope, no re-zeroing required Multi-coated all-glass optics Fast catadioptic front lens system Large 21 mm output window Lightweight and rugged Comes with Quick Release Mount Optional 7/8" weaver mount Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter) Automatic brightness control Resistance to severe conditions Up to 60 hours of continuous operation with one Lithium battery Limited Two-Year Warranty
Specification Total Darkness IR System Yes "SMART" Technology No IIT Generation 3Photocathode Type Thin-Filmed/Auto-Gated Resolution 64-72 lp/mmSignal to Noise Ratio 25-30 Figure of Merit 1800 typicalPhotocathode Sensitivity 2000-2800 MTTF - Mean Time Before Failure10,000 hours Magnification 1x Lens System F1.44, 80 mm Proshield Lens Coating Yes FOV 13° Exit Pupil 21 mm Range of Focus 10 m to infinity Diopter Adjustment No Controls Direct Remote Control Yes Automatic Brightness Control Yes Bright Light Cut-off YesInfrared Illuminator Detachable IR450 IR Indicator Yes Low Battery Indicator No Power Supply 1 x 3 V CR123A type battery Battery Life 50 hrs Reticle System No Windage & Elewation Adjustment NoEnvironmental Rating Waterproof MIL-STD-810 Yes Operating Temperature-40 to +50 °CStorage Temperature-50 to +70 °CDimensions150x80x72 mm 5.9"x3.2"x2.8"Weight0.64 kg / 1.4 lbsWarranty2 years
