ATN PS22-3A NVDNPS223A - Day/Night System - ATN Night Vision Equipment

description

The

ATN PS22-3A System

is an attachment for a Daytime Riflescopes with 1x Magnification that converts a Scope into a high-quality very accurate Night Vision Weapon Sight.
The ATN PS22-3A mounts in front of a Daytime Scope. Re-zeroing of the Scope is not required. The ATN PS22-3A comes standard with 7/8" weaver mount. There is also Adapter for ARMS quick release mount and optional Ring Adapter allows to mount unit onto the objective of the Day Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail.
This ingenious setup allows the shooter to go from day to night in less then 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock.
The ATN PS22-3A is a complex optical-electronic system. The

Night Vision Device

contains an Image Intensifier Tube assembly with an integrated high voltage power source and the three volt battery housing.
ATN PS22 сustomer testimonial 1
ATN PS22 сustomer testimonial 2
ATN PS22 сustomer testimonial 3
ATN PS22 review 1

FEATURES

Easily changes daytime scope to Night Vision
Mounts in front of the daytime scope, no re-zeroing required
Multi-coated all-glass optics
Fast catadioptic front lens system
Large 21 mm output window
Lightweight and rugged
Comes with Quick Release Mount
Optional 7/8” weaver mount
Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter)
Automatic brightness control
Resistance to severe conditions
Up to 60 hours of continuous operation with one Lithium battery
Limited Two-Year Warranty

Detection, Recognition, Identification

Select the Device:

Human DRI

Vehicle DRI

Measurements: Meters

The Johnson Criteria assumes that the critical dimension for a human being is 0.75 meters. To get DRI, you need 1.5 pixels, 6 pixels and 12 pixels across 0.75 meters in the object pane.
That means:

Detection
1.5 pixels / 0.75m = 2 pixels per meter
Recognition
6 pixels / 0.75m = 8 pixels per meter
Identification
12 pixels / 0.75m = 16 pixels per meter

Assuming that a man is 1.83m by 0.5m, the following would apply:

Detection 3.6 pixels by 1 pixel
(You can see
something is there)

Recognition
13 pixels by 5 pixels
(You can see that a person
is there)

Identification
28.8 pixels by 8 pixels
(You can see that the
person looks like a civil man)

Assuming that a vehicle is 4m by 1.5m, the following would apply:

Detection
2.8 pixels by 1 pixel
(You can see something
is there)

Recognition
13 pixels by 5 pixels
(You can see that a
vehicle is there)

Identification
26 pixels by 10 pixels
(You can see that the vehicle
may be a off-road vehicle)


		Night Vision Featured Retailers

		Buy PS22-3A Night Vision Monocular from Optics Planet Buy PS22-3A Night Vision Weapon Sigh from Night Galaxy Buy PS22-3A Front Mounted Night Vision System from B&H Photo Video


		Included Accessories Instruction Manual Lens Tissue Packing box Warranty card Mil-Spec Hard Case Two Lithium Batteries IR450-B4 Quick Release Mount Remote Control Unit Lens Cap Back Cap Picatinny Rail Light Supressor for the scopes with 42-63 mm lens diameter Light Supressor for the scopes with 30-42 mm lens diameter Light Supressor for Trijicon ACOG scopes Optional Accessories (check to add to cart) $ 119.00 Long Rail Adapter $ 119.00 Scope Mounting System #1 $ 119.00 Scope Mounting System #2 $ 129.00 Scope Mounting System #3 $ 129.00 Scope Mounting System #4 $ 129.00 Scope Mounting System #5 Call for quote 7/8” Weaver Mount $ 119.00 Scope Mounting System #6 $ 99.95 Platform Ring Call for quote Day Scope Light Suppressor $ 429.00 Boresight Attachment Mount System (B.A.M.)


		Detection, Recognition, Identification Select the Device: Human DRI Vehicle DRI Measurements: Meters The Johnson Criteria assumes that the critical dimension for a human being is 0.75 meters. To get DRI, you need 1.5 pixels, 6 pixels and 12 pixels across 0.75 meters in the object pane. That means: Detection 1.5 pixels / 0.75m = 2 pixels per meter Recognition 6 pixels / 0.75m = 8 pixels per meter Identification 12 pixels / 0.75m = 16 pixels per meter Assuming that a man is 1.83m by 0.5m, the following would apply: Detection 3.6 pixels by 1 pixel (You can see something is there) Recognition 13 pixels by 5 pixels (You can see that a person is there) Identification 28.8 pixels by 8 pixels (You can see that the person looks like a civil man) Assuming that a vehicle is 4m by 1.5m, the following would apply: Detection 2.8 pixels by 1 pixel (You can see something is there) Recognition 13 pixels by 5 pixels (You can see that a vehicle is there) Identification 26 pixels by 10 pixels (You can see that the vehicle may be a off-road vehicle)


		Price $4 349.00