ThermoSight T50 320x240 Thermal Weapon Sight Thermal Weapon Sights

RECOMMENDED USE

professional

law enforcement

ThermoSight T50 320x240 Thermal Weapon Sight - Image 1

ThermoSight T50 320x240 Thermal Weapon Sight - Image 2

Item # TIWSTST50


		Price Call for quote


		Warranty:

Export Available - Licensing may be required

Shopping Status

Item in cart:	Total price:
0	$ 0.00

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

description

An uncooled weapon sight that doubles as a portable reconnaissance scope, T50 is designed to interface with scopes such as the Trijicon® ACOG® for the M-4/M-16 and similar weapons.

FEATURES

Compatible with Standard Day Optic: Designed to interface with day sights such as Trijicon Advanced Combat Optical Gunsight (ACOG) Model TA31, 4x32 presenting the soldier with the same field of view, keeps reticles calibrated, maintaining boresight
Longwave thermal imaging sensor:Provides crisp imagery through total darkness, fog, smoke, dust, and many other obscurants
Multi use design:Offers mission flexibility for use as a thermal weapon sight and as a rugged hand held imager for a variety of scouting, surveillance, and covert operations
Rubber Shroud:Ensures covert operation by eliminating illumination of the operator from the viewfinder
Small and lightweight :Highly portable design reduces operator fatigue
Simple operation:Large, rugged, single button controls for basic image adjustment, no complicated menus to navigate
No special batteries required:Runs on CR123 photo cells
It’s all FLIR inside:FLIR controls the entire supply chain on the critical technology inside the ACTS ensuring fast service and long term support

Specification

THERMAL IMAGING PERFORMANCE
Sensor type	320 x 240 VOx microbolometer
Field of view	9.33° (h) x 7° (v)
Spectral band	7.5-13.5 μm
Automatic features	Contrast, brightness, STACETM (digital image enhancement)
SYSTEM FEATURES
Silent operation	Inaudible beyond 1 m
Bore sight adjustment	Holds boresight through extensive rounds of firing
OUTPUTS
Video	Built in Display VGA monochrome and RS-170 output
POWER
Power requirements	3 CR123 batteries
Battery life	Approximately 9 hours continuous use
ENVIRONMENTAL
IP rating	IP 68
Operating temp	-40°C to +75°C (-40°F to +131°F)
Storage temp	-50°C to +85°C (-58°F to +149°F)
DIMENSIONS, WEIGHT & MOUNTING
Dimensions (lens covers off)	5.3” L x 3.5” W x 4.0” H
Weight	24 oz with batteries, lens covers, and rail mount
Mounting	Picatinny Rail mount
INTERFACES
Command and Control	Auto/manual gain/level, polarity, manual NUC, 2x, 4x digital zoom
STANDARD PACKAGE
Laser Pointer	30 mW @ 850 nm and safety mode of 0.5 mW
Batteries	3 each, CR123, fit into plastic sleeve for quick removal and replacement


		Included Accessories Instruction Manual


		Detection, Recognition, Identification Select the Device: Human DRI Vehicle DRI Measurements: Meters The Johnson Criteria assumes that the critical dimension for a human being is 0.75 meters. To get DRI, you need 1.5 pixels, 6 pixels and 12 pixels across 0.75 meters in the object pane. That means: Detection 1.5 pixels / 0.75m = 2 pixels per meter Recognition 6 pixels / 0.75m = 8 pixels per meter Identification 12 pixels / 0.75m = 16 pixels per meter Assuming that a man is 1.83m by 0.5m, the following would apply: Detection 3.6 pixels by 1 pixel (You can see something is there) Recognition 13 pixels by 5 pixels (You can see that a person is there) Identification 28.8 pixels by 8 pixels (You can see that the person looks like a civil man) Assuming that a vehicle is 4m by 1.5m, the following would apply: Detection 2.8 pixels by 1 pixel (You can see something is there) Recognition 13 pixels by 5 pixels (You can see that a vehicle is there) Identification 26 pixels by 10 pixels (You can see that the vehicle may be a off-road vehicle)

ATN ThermoSight T50 320x240 Thermal Weapon Sight

Detection, Recognition, Identification