Night Vision Equipment by ATN.
See Like a Cat at Night

Customer Review

ATN PVS7-3 Generation III Nightvision Goggles

"The ATN PVS7-3 are dependable, high performance Generation III nightvision goggles. The Generation III devices are the most advanced nightvision units available to the consumer to date. An improved microchannel plate greatly enhances resolution and tube life. This unit is identical to the"
Learn more...

ATN PVS7-3 Night Vision Goggle

"I have personally used these during my training/combat in the United States Marine Corps infantry. I have never found a set of NVG's that performed at this level since! If you have a use for them, I would strongly consider these first. They are spendy but would you trust a Chinese toymaker"
Learn more...

ATN PVS-7 Night Vision Goggles-3rd Generation

"Actual AN PVS-7s were top-of-the-line in 1990. We used these to see in the dark. They turn star light into overcast days and full moon in to daylight. You can see out to nearly unlimited"
Learn more...

ITT Pinnacle™ Image Intensifier Tubes
The ATN Night Vision Units with the 3P designation use ITT Pinnacle™ Image Intensifier Tubes. The industry leading ITT Pinnacle™ Image Tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas. The Pinnacle™ Tubes with gated power supply minimize any "Halo" effects. "Halo" is often associated with using Night Vision Devices in the urban area where random street lights are often an issue with early Generation Night Vision Devices.

Night Vision Units with Pinnacle™ Tubes have a typical resolution of 64-72lp/mm and a typical Signal-to-Noise Ratio of 24. All Night Vision Devices utilizing Pinnacle™ Image Intensifier Tubes come with ITT data record sheet. Units with Pinnacle™ Tubes are not available for export. A signed export compliance and end use statement are required prior to shipping of these units.

*Pinnacle is a registered trademark of ITT Night Vision* ITT Pinnacle™ Image Intensifier Tubes

ATN PVS7-3P Night Vision Goggles

RECOMMENDED USE

professional

law enforcement

boating

TECHNOLOGIES

ATN PVS7-3P Night Vision Goggles - Image 1

ATN PVS7-3P Night Vision Goggles - Image 2

Item # NVGOPVS73P


		Price $4 099.00


		Generation:


		Warranty:

This product is Not available for export

System Pricing Calculator

System component(s):	Price:
ATN PVS7-3P	$4099.00
3X Mil-Spec Magnifier Lens
5X Mil-Spec Magnifier Lens
SKB Mil-Standard Hard Case
IR Spot/Flood Lens
MICH Helmet Mount Assembly USA
PAGST Helmet Mount Assembly USA
Total Price	$4099.00

Shopping Status

Item in cart:	Total price:
0	$ 0.00

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

This System is also available in:

	ATN PVS7-2
	ATN PVS7-CGT
	ATN PVS7-HPT
	ATN PVS7-3
	ATN PVS7-3A
	ATN PVS7-WPT™

description

The ATN PVS7-3P

Night Vision Goggles

is a full robust, dependable, high-performance Night Vision System. This model is identical to the ATN AN/PVS-7 model adopted as a standard issue to U.S. Army ground troops and designed to assist viewing and provide reliable service in the most unfavorable conditions. The ATN PVS7-3P

Night Vision Device

also incorporates an infrared illuminator with a momentary and continuous on switching function. Infrared operation and low battery indicators are displayed within the user’s field of view. The ATN PVS7-3P comes complete with a lightweight, fully adjustable military head strap that allows for comfortable long-term use. Full U.S. Mil Spec body with goggle assembly, soft carrying case, demist shield, sacrificial filter for objective lenses, shoulder strap, head mount assembly with 3 brow pads, lens tissue, neck cord and front lens cap.

Specification

Intensifier Tube	3P
Resolution	64-72 lp/mm
Photocathode Type	Thin-Filmed/Auto-Gated
Signal to Noise Ratio	24 typical
Figure of Merit	1800 typical
Photocathode Sensitivity	2000-2800
Magnification	1x
Lens system Element	F 1.17:26 mm
FOV	40°
Diopter adjustment	+2/-6
Range of focus	0.25 m to infinity
Controls	Direct
Power supply	2 - AA Batteries (Alkaline) or 1 - BA-5567/U (Lithium)
Infrared illuminator	Built-in Flood
Environmental rating	Waterproof
Storage temperature	-50 to +70°C
Battery life	60 w/o IR
Operation temperature	-40 to +50°C
Dimensions	162 x 76 x 152 mm 6.4" x 3" x 6"
Weight	0.65 kg / 1.4 lbs


		Included Accessories Instruction Manual Lens Tissue Packing box Soft carrying Case Warranty card Lens Cap Demist shield 2 AA batteries Sacrificial filter Head Mount Assembly Optional Accessories (check to add to cart) $ 599.00 3X Mil-Spec Magnifier Lens $ 1 029.00 5X Mil-Spec Magnifier Lens $ 169.00 SKB Mil-Standard Hard Case $ 55.00 IR Spot/Flood Lens $ 249.00 MICH Helmet Mount Assembly USA $ 249.00 PAGST Helmet Mount Assembly USA


		Detection, Recognition, Identification Select the Device: Human DRI Vehicle DRI Measurements: Meters The Johnson Criteria assumes that the critical dimension for a human being is 0.75 meters. To get DRI, you need 1.5 pixels, 6 pixels and 12 pixels across 0.75 meters in the object pane. That means: Detection 1.5 pixels / 0.75m = 2 pixels per meter Recognition 6 pixels / 0.75m = 8 pixels per meter Identification 12 pixels / 0.75m = 16 pixels per meter Assuming that a man is 1.83m by 0.5m, the following would apply: Detection 3.6 pixels by 1 pixel (You can see something is there) Recognition 13 pixels by 5 pixels (You can see that a person is there) Identification 28.8 pixels by 8 pixels (You can see that the person looks like a civil man) Assuming that a vehicle is 4m by 1.5m, the following would apply: Detection 2.8 pixels by 1 pixel (You can see something is there) Recognition 13 pixels by 5 pixels (You can see that a vehicle is there) Identification 26 pixels by 10 pixels (You can see that the vehicle may be a off-road vehicle)

Night Vision Goggles

Night Vision Device

Detection, Recognition, Identification