description

The ATN PS22-2 is an attachment for a Daytime Riflescopes with 1x Magnification that convers Scope into a high-quality very accurate Night Vision Weapon Sight.
The

ATN PS22-2 System

mounts in front of a Daytime Scope. Re-zeroing of the scope is not required. The ATN PS22-2 comes standard with 7/8" weaver mount. There is also an Adapter for ARMS quick release mount. Optional Ring Adapters allow to mount the unit onto the objective of the Daytime Scope (25...62mm diameter). The IR Illuminator can be mounted onto the optional Picatinny Rail.
This ingenious setup allows the shooter to go from day to night in less than 30 seconds without tools, without changes in eye relief and remain zeroed all around the clock.
The ATN PS22-2 is a complex optical-electronic system. The device contains an Image Intensifier Tube assembly with an integrated high-voltage power source and the three volt battery housing.

ATN PS22 сustomer testimonial 1
ATN PS22 сustomer testimonial 2
ATN PS22 сustomer testimonial 3
ATN PS22 review 1

FEATURES

Easily changes daytime scope to Night Vision
Mounts in front of the daytime scope, no re-zeroing required
Multi-coated all-glass optics
Fast catadioptic front lens system
Large 21 mm output window
Lightweight and rugged
Comes with Quick Release Mount
Optional 7/8” weaver mount
Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter)
Automatic brightness control
Resistance to severe conditions
Up to 60 hours of continuous operation with one Lithium battery
Limited Two-Year Warranty

Specification

Total Darkness IR System	Yes
"SMART" Technology	No
IIT Generation	2
Photocathode Type	Multi - Alkali
Resolution	40-45 lp/mm
Signal to Noise Ratio	12-20
Figure of erit	<1250
MTTF - Mean Time Before Failure	5,000 hours
Magnification	1x
Lens System	F1.44, 80 mm
Proshield Lens Coating	Yes
FOV	13°
Exit Pupil	21 mm
Range of Focus	10 m to infinity
Diopter Adjustment	No
Controls	Direct
Remote Control	Yes
Automatic Brightness Control	Yes
Bright Light Cut-off	Yes
Infrared Illuminator	Detachable IR450
IR Indicator	Yes
Low Battery Indicator	No
Power Supply	1 x 3 V CR123A type battery
Battery Life	60 hrs
Reticle System	No
Windage & Elewation Adjustment	No
Environmental Rating	Waterproof
MIL-STD-810	Yes
Operating Temperature	-40 to +50 °C
Storage Temperature	-50 to +70 °C
Dimensions	150x80x72 mm 5.9"x3.2"x2.8"
Weight	0.64 kg / 1.4 lbs
Warranty	2 years


		Night Vision Featured Retailers

		Buy PS22-2 Night Vision Monocular from Optics Planet Buy PS22-2 Front Mounted Night Vision System from B&H Photo Video Buy PS22-2 Night Vision Weapon Sight from Night Galaxy Buy PS22-2 Day/Night System from Tactical Market


		Included Accessories Instruction Manual Lens Tissue Packing box Warranty card Mil-Spec Hard Case Two Lithium Batteries IR450-B4 Quick Release Mount Remote Control Unit Lens Cap Back Cap Picatinny Rail Light Supressor for the scopes with 42-63 mm lens diameter Light Supressor for the scopes with 30-42 mm lens diameter Light Supressor for Trijicon ACOG scopes Optional Accessories (check to add to cart) $ 119.00 Long Rail Adapter $ 119.00 Scope Mounting System #1 $ 119.00 Scope Mounting System #2 $ 129.00 Scope Mounting System #3 $ 129.00 Scope Mounting System #4 $ 129.00 Scope Mounting System #5 Call for quote 7/8” Weaver Mount $ 119.00 Scope Mounting System #6 $ 99.95 Platform Ring Call for quote Day Scope Light Suppressor $ 429.00 Boresight Attachment Mount System (B.A.M.)


		Price $1 999.00